Baid Polish uses a 'Triple Layer Blue/Bright Chromium System'. Most metals which are used in cars, motorcycles are suitable for chrome plating. All the wheels are stripped of paint/clear coating. If wheel is already chromed, additional charge per wheel is added to strip old chrome off.

Baid Polish is one of the leading providers of chrome plating services to both the private home and trade restorer in the U.S. region.

We offer skilled, professional and affordable chrome plating service as well as chrome restoration services to clients. Being chrome plating professional, our attention to technical knowledge, quality and expertise grant us to also provide innovations such as the ability to chrome plastic parts.

Whether you are a bike or car enthusiast seeking to have chrome parts repaired, or a restoration place executing restorations for individuals, we ask you to call us for chrome plating services.

Prior to chroming, we polish the parts for a smooth and shiny finish.

All Chrome Plated Parts Receive The Following Treatment:

  • Base Zinc and Nickel Coating

  • Polished Copper Coating

  • Top High Mirror Gloss Chrome Coating


Copper plating is a coating of copper metal on another material, often other metals. Plating is designed to increase durability, strength, or visual appeal, and copper plating specifically is often used to improve heat and electrical conductivity.

When you need first-rate copper plated brakes services, visit Baid Polish in the USA. We are the professionals in plating and refinishing different auto parts like air vents and bumpers. Before we plate all forms of metals, we make certain to first polish dings and dents to generate a high standard finish. We always try to provide complete satisfaction to all our clients.

We heavy copper plate all sectors necessary as standard, paying specific attention to the needed tolerance and fit. This empowers us to recover several parts not considered possible, and provides a remarkable finish and more essentially level of weather preservation.

Copper plating was the factory standard for both Rolls-Royce and Mercedes and in our mind provides the only way to execute a quality job.

We also offer a clear coat on top of the copper so it doesn’t tarnish.


Baid Polish specializes in 24 karat gold plating for your pride and joy. Today, our vehicles are a direct extension of our personality. So it’s just a natural fit to do the little extra things that will make your vehicle look the best it can. Gold plating is a method of depositing a thin layer of gold onto the surface of another metal, by chemical or electrochemical means. Our parts are plated with the purest 24-karat gold to give your emblem that golden luster that will draw attention to any car.

When it comes to 24 karat gold plating, Baid Polish is a leader in the industry. Each of our professional electroplating finishes is of exceptionally high quality. We also specialize in providing candy rose gold powder coating services in the USA.

Plating has been a crucial element in the growth of modern technology. Plating is utilized for corrosion resistance, to enhance solderability of an exterior, hardening, to enhance wear-ability, decline friction, to enhance paint adhesion, change conductivity, for designing and other purposes.

At Baid Polish, our electroplating abilities are very extensive and involve the broadest range of plating materials, colors, and tints accessible for your metal restoration and refinishing needs.


Our trained staff will polish and clean your vehicle to a very high standard at very vying prices. Keep your car in showroom condition through our quality metal polishing service. As professional U.S. metal polishers, we aim to offer a fully extensive and totally professional polishing service.

Here at Baid Polish, we provide the finest standards of finish and client service to be found anywhere and we have the upgraded equipment accessible and only utilize the very best products. We specialize in all facets of car polishing and car detailing.

We are highly experienced with prestige vehicles. We also provide prestige car polishing services for all forms of highly valuable vehicles.

Many people ask many questions about how we perform Metal Polishing Services to parts and get everything so much to a Chrome – Like Mirror Finish? We can perform Metal Polishing to many different metals such as Aluminum, Steel, Mild Steel, Titanium, Brass, Silver and other Metals too. Lets look into what really goes on when Polishing all these different kinds of Metals to a Mirror Finish.


After taking delivery we very carefully set everything out looking over the metal to see if it has any deep scratches, surface scratches in the metal and we see if the metal is aluminum, stainless steel, titanium, brass, etc. Depending on the type of metal the buffing wheels that we pick out may be different.


Now we need to check to make sure if we need to cut any protrusions off of the metal and we need to be sure to do this before the grinding phase as the grinding phase is more of a “rough smooth” phase. Cutting the metal is not considered a “smooth” phase at all, so this needs to be performed before the grinding.


Now would be the first phase of polishing the metal if you will, or better known as custom grinding. This process is only done to the metal if need be as you definitely would not want to grind anything away if it was un-necessary. We will custom grind off anything that needs to be taken off of the customers part as the customer requested.


This is the phase to get all the metal smoothed out after all of the grinding, cutting or maybe if the metal if very rough it will need to be smoothed out with a very coarse sand paper. Sanding the metal in a manner that is quick at all is going to require the use of sanding machines with special discs setup on the machines. Very careful attention needs to be paid to make sure all of the metal is perfectly smooth because if the metal is not smooth enough when you are finished with this stage then when you go to polish the metal later on it will show up very quickly.


Now that the metal surfacing of phase 1 is over we now have to get into Phase 2 which involves getting the very coarse grit just a little finer to get all of the deeper scratches out from Phase 1. This step is just as important as Phase 1 because if you go to the next step just a little too soon there will be a lot of time wasted and unless you want a bad metal polishing job then you are going to have to start all over again which will waste a lot of time and energy!


Now we are ready to start the early stages of polishing the metal. Remember what was said earlier about knowing what type of metal you are working with? Well this is where you really need to know this information depending on if you are doing aluminum polishing, stainless steel polishing, steel polishing, titanium polishing or performing polishing to any other type of metal will change what polishing wheel you will be using. When you get to this stage before starting you need to make sure all of the scratches are out from the Metal Surfacing Phase 2 because if not that will make this stage twice as difficult to do.


After you are finished up polishing the metal in Phase 1 this Phase will be just as difficult as the other Phase and probably more difficult in most cases. Before you even begin on Phase 2 though you need to make sure all the surface areas of the metal are uniform because if not that will make this stage so much more difficult. Be sure to have a good machine that can have a lot of pressure put on it for long periods of time. You will start to get a little bit of a Mirror Finish with this stage, but not quite good enough for Baid Polish.


Buffing Metal is not too difficult if you have the right tools and the right buffing wheels for the metal you are working with. Be sure to have a machine that can take a lot of stress and the metal will come out to a brilliant mirror finish once pressure is applied in a direction that will accent the metal. This Phase is the last phase for the Mirror Finish Polishing that if done correctly with the right polishing wheels for the right metal will come out to a Chrome – Like Mirror Finish. Once you are doing buffing the metal you will need to perform the cleanup phase which I will be writing about next time.


Powder coating is becoming one of the most wanted surface finishing techniques now a days. The definition of powder coating is the process of applying dry paint to a part. In comparison to normal wet painting such as house paints, the solids are in suspension in a liquid carrier, which must evaporate before the solid paint coating is produced.

Powder coating provides an attractive and durable finish, offering excellent resistance to corrosion, heat, impact, and abrasion.  It is a great alternative to paint.

Powder coating is a metal finishing procedure that replaces classical wet painting when a superior coating is needed. We are a powder coating specialist as our procedure provides a coating paint product that is enforced as a free-flowing, powder.

The major difference between a traditional liquid paint and a powder coating is that powder coating does not need a solvent to keep the filler parts and binder in a liquid suspension way. Our best powder coatings are classically applied electrostatically and are then restored under heat to grant it to flow and create a complete single skin shelter the part being painted.

The powder used in this procedure is a thermoplastic polymer. It is generally utilized to prepare a hard finish that is difficult than traditional paint. Powder coating is generally utilized for coating of metals, which is ideal for the automotive custom car service.


When you choose our locally-owned and operated company to refinish or restore your wheels, you are getting a team of highly trained certified wheel technicians. Working closely with our technicians, you can add a little personality and uniqueness to your wheels. From adding a chrome finish to a candy color, we can help you create something unique.

Baid Polish is able to provide quality refinishing to wheels. If your wheel has clear coat, paint damage, corrosion, curb rash nicks or scrapes we are able to restore your wheel to near factory conditions. While this damage may seem cosmetic only, what happens is that the protective layer of paint or powder coat has been removed in that area, exposing the raw aluminum to the elements. This will eventually lead to oxidation, and corrosion of the base material. This can lead to low density areas in the aluminum which leak air from the tires or be more likely to crack during normal driving. Our goal is to provide the best refinishing service at the lowest cost possible. Please allow 24-72 hours for refinish work.

Wheel damage can take away from a vehicle its curb appeal remarkably. From gauges to scrapes and cracks, the inappropriate appearance can also result in a costly fix which is new wheels.

Luckily, Baid Polish has been perfecting our wheel refinishing services to match the growing demand for high standard wheel repairs.

A refinished wheel will provide the wheel a new like condition. It is essential to mark that the refinished wheel was genuinely utilized, so there may be a minor imperfections upon close investigation.

Our services can fix a number of wheel damage – from damaged rims and peel clear coats to bent and damaged wheels, our trained technicians are able to provide several types of wheels to their natural condition.

We offer Wheel Repair: curb rash, bends, cracks, wheel straightening. missing pieces. We provide quality trusted work and give the best to our customers who know that we hold
an honest and dependable business.